Tel: 02 9427 6755

Stealth Acoustics - LR3

$2,499

Enquire about this product

 The Stealth Acoustics model LR3G is a 3-way, full-range speaker system that becomes completely invisible after installation. The speaker has a rigid frame that attaches directly to standard structural framing. The paintable active diaphragm face is bonded to the frame of the speaker panel, creating an active area surrounded by a stable mounting area.

The Stealth Acoustics LR3G incorporates an acoustically coupled high-power 8” cone woofer with 3 directly coupled 25 mm neo-magnet high-frequency motors. Advanced internal carbon fiber materials allow for smooth frequency extension to 20 kHz. When the LR3G is installed in standard insulated 2” x 4” framing and allowed to function in a full 8 foot stud bay, frequency response below 45 Hz can be achieved. The LR3G contains three independent protection circuits (low, mid-range and high frequency sections) that automatically reset upon reduction of excessive amplifier power.

The LR3G may be installed in either the wall or ceiling and on-site finishing options include latex paint, light wallpaper, fabrics and selected texture coats. There is no need for special vellums or other nonstandard wallboard finishing materials. Advanced finishing methods such as Venetian plaster and select veneers are supported using special techniques.

Recommended Uses Include
> Home Theater / Surround Sound
> High End Multi-Room Audio Systems
> Foreground Music
> Background Music
> Sound Reinforcement

Specifications
Frequency Response: 45Hz to 20kHz
Power Capacity:200 watts RMS 75 watts minimum recommended power
Protection:Three independent self-resetting poly switches for low, mid-range and high frequency drivers
Sensitivity: 81 dB (1 watt / 1 meter)
System Impedance: 8 omh nominal
Driver Components: 1” (25 mm) neodymium motor + Two 1” (25 mm) neodymium motors + 1.5” (38 mm) voice coil, 8” (203 mm) woofer, Ceramic 20 oz. (622 gr) magnet
Polar Dispersion: 170 degrees vertical and horizontal
Dimensions: Width: 15-7/8” (403 mm)
Height: 30” (762 mm)
Mounting Depth: 2-1/2” (64 mm)
Product Weight: 19 lbs. (8.8 kg) each

Included Accessories:
Mounting shims
Shim tape
Mounting screws
Terminal wrench
 

Print

Contact Len Wallis Audio

Address: 64 Burns Bay Road,
Lane Cove NSW 2066,
Australia
Telephone: (02) 9427 6755
Email: sales@lenwallisaudio.com.au
http://lenwallisaudio.com